Production Plus 2 Layer

The Production Plus Service is designed for 2-layer PCBs that include the silkscreen and solder mask layers. These additional layers give the boards a very professional appearance. This is also our best value when ordering large quantities of boards.

Description

Production Plus Service boards have top and bottom copper layers with all holes plated through. They also include top and bottom solder mask layers, giving the boards a green color. On the top or bottom surface is a white silkscreen layer showing the component outlines. The solder mask layers make the boards a little easier to solder and give a very professional appearance. Select a 1 day, 2 day or one-week manufacturing time.

  • 2 Layer – Price based on size and Qty. 1,2, 5 Day Build
  • New – Top and Bottom Silkscreen and Solder Mask
  • New – Expanded Holes Size Options
  • Quantity Discount
  • Silver (RoHS) plating or Tin/lead
  • Perimeter routed to shape

Choose a tin/lead or lead-free RoHS compliant finish:

PhotoProductionPCB_TL_800PhotoProductionPCB_LF_800

Quantity Discount
2-49 0
50-99 11%
100-249 15%
250-499 19%
500-999 22%
1000-1999 25%
2000-up 26%

Manufacturing Specifications

 

 Production Plus
Quantity1 and up
Layers2 Layer
Lead Time1 Day, 2 Day, 5 Day
Maximum Board SizeThe maximum board size we manufacture is 12 x 14 inches.
Minimum Board SizeMinimum dimension in height or width is 0.35 inches.Total board area must be greater than 0.4 square-inches. (i.e. smallest square board we can make is 0.64 x 0.64 inches)
Panelize Muliple BoardsMultiple circuits can be pasted together on a single board, but we do not cut them apart. The perimeter of a board cannot include long slots as they can cause manufacturing problems. We are not responsible for any defects that are a result of routing multiple circuits on a single board.
Minimum Trace and SpaceEtching resolution is: 0.006″ minimum trace width, 0.006″ minimum space width.
Inner LayersNo Inner Layers
Solder MaskTop and Bottom
Silk ScreenTop and Bottom
Surface FinishTin\Lead or SilverBtnLearnAboutLeadFreeOption
Solder Mask Pad TolerancePads on the solder mask layers are grown by 0.003″ on all sides. As a result, very fine pitch surface mount components may not include any solder mask between the pins.
MaterialOur 2 layer laminate is .059" FR-4 epoxy glass which includes .0007" copper on each side (industry standard 1/2 ounce copper base). We plate an additional .001" copper on the surface after drilling and imaging, resulting in a copper thickness on the surface of ~0.0017″.
Dielectric ConstantThe dielectric constant of our FR-4 laminate ranges from 4.2 to 5.0.
Plated HolesBoards are manufactured double-sided with all holes plated-through.
HolesMinimum 0.008″ - Max 0.251″. Hole sizes in between as specified in software.
Hole ToleranceThese sizes are the finished hole diameters after plating. The 0.014″ hole may be filled with solder and can only be used as via. The tolerance for the 0.020″ hole is +0.003 / -0.005. The tolerance for the other hole sizes are +/- 0.004″.
Hole Location ToleranceOur hole location tolerance is +/- 0.005”. As such, the tolerance between two holes would be +/- 0.010”.
Minimum Hole DistanceA minimum of 0.021″ space must remain between adjacent holes. For example, the center-to-center distance between two pads with 0.020″ holes must be 0.041″ or greater.
Internal Slots and CutoutsNone
Perimeter SlotsBoard perimeters are cut to shape using a 0.093″ router bit. Slots in the perimeter must be 0.100″ or wider. Narrower slots will not be milled correctly.
Perimeter RoutingThe edges of the board are cut with an accuracy of +/- 0.015″. A minimum of 0.020″ blank space is recommended between the perimeter and all features on the board. Traces placed closer than 0.015″ to the board’s edge may be routed off.
TemperatureThe maximum operating temperature is 125 degrees C.